Tagged: ,

Log In Register Lost Password
Viewing 15 posts - 1 through 15 (of 20 total)
1 2
  • Author
    Posts
  • September 24, 2017 at 5:32 am #28538
    fredsanford
    Participant

    I have a VX8 and the 2.1 firmware update stops at 83%. The controller is now unusable. I’ve tried to locate VX firmware v1.09 & 1020b but the download on the CME site has a file that says nodata.rar.

    Can someone please help.

    Fred.

    September 25, 2017 at 8:38 am #28540
    Amanda
    Participant

    Hi,Fredsanbord

    Please download V1.09 firmware of VX from below link:
    http://pan.baidu.com/s/1o7RiIwi
    Please do the firmware upgrade under Windows XP OS. Because VX brain only can work with Windows XP.
    If you like, you can send me mail to discuss your problem.([email protected]) Thanks.

    September 25, 2017 at 8:52 am #28541
    fredsanford
    Participant

    http://pan.baidu.com/s/1o7RiIwi

    It says:

    Oh oh, the page you are visiting does not exist.

    September 27, 2017 at 4:22 am #28543
    Amanda
    Participant

    Hi,Fredsanbord

    Sorry for the troubles.
    Please try below link to download v1.09 firmware. Thanks.
    https://mega.nz/#!c3QQjRyL

    September 28, 2017 at 1:43 pm #28544
    fredsanford
    Participant

    So,

    My issue was resolved by running the VX Brain software in a Windows XP virtual machine. (didn’t have an XP computer)
    Now I am running version 2.1 of the firmware and it works flawlessly.
    I’m able to use the motorized faders in FL Studio without a problem in Mackie Control Mode.
    The controller has so much potential.

    I have a Maschine studio which has a software editor program. That would be really cool for this.

    Is there an SDK available for it?

    Amanda, thank you for all your help.

    September 30, 2017 at 11:00 am #28546
    fredsanford
    Participant

    Found out there is a version 2.3 of the VX firmware. Can someone please send it to me.

    Thanks.

    November 6, 2017 at 9:53 am #28578
    Amanda
    Participant

    Hi,Fredsanbord

    You are welcome. Please download v2.3 of VX firmware from below link:
    https://mega.nz/#!w7IhHA4R

    November 20, 2017 at 12:55 am #28587
    ahmedzaid
    Participant

    Hi there i have the vx 5 and i need the firmware please someone send it to me

    Thanks in advance !

    November 21, 2017 at 9:04 am #28588
    Amanda
    Participant

    Hi, Ahmedzaid

    Please download v2.3 of VX firmware from below link:
    https://mega.nz/#!w7IhHA4R
    And please do the firmware upgrade under Windows XP. Thanks.

    November 22, 2017 at 3:01 pm #28589
    ahmedzaid
    Participant

    Thank you i did it now i need the drivers win 7 64 bit

    November 27, 2017 at 8:28 am #28603
    Amanda
    Participant

    Hi, Ahmedzaid

    VX don’t need any especial under any OS. Its driver is plug and play. If you fall across some problem when intall VX drvier under Win7 64 bit? Please tell me the particular. Or you can mail me to discuss. ([email protected]) Thanks.

    February 5, 2019 at 7:38 pm #28942
    robinsonbabler
    Participant

    is asking for decryption key when trying to download files by mega. Could you pass me up, please?

    February 5, 2019 at 7:44 pm #28943
    robinsonbabler
    Participant

    Hello

    Could you send me the firmware files with 1020b please?

    You are asking for a password to download by mega.

    Thank you

    February 9, 2019 at 9:53 am #28952
    Amanda
    Participant

    Hi, Robinsonbabler

    If you still need 1020b now? Please mail me ([email protected]). Thanks.

    March 15, 2019 at 4:57 am #28966
    heddu
    Participant

    I need the vx60 firmware, version 2.3.
    can send me?
    The link is asking for a password.
    https://mega.nz/#!w7IhHA4R

  • Author
    Posts
Log In Register Lost Password
Viewing 15 posts - 1 through 15 (of 20 total)
1 2
  • You must be logged in to reply to this topic.