[keymanpal]

Hi,
Similar to the “Pitch functions” (that enables changing MIDI CH, User Curves, Poly/mono AT)
would be awesome the ability to change Presets (pre1, pre2) either with the keys, using a key combo?
octave+ and pitchbend+ or octave+ and octave- or similar to the Transpose.

Thanks in advanced

[Zhao Yitian]

I think you can assign MIDI program change number to a key, but you cannot have program change +/- function. Sorry.

[keymanpal]

Thanks for replying Zhao,
I was referring to whole xKey Presets, example:
Saved Presets
Preset 1 – all keys send MIDI Control Change (key1 MIDI CC1 – key2 MIDI CC2 etc)
Preset 2 – all keys send Program Change (key1 PRG1 – key2 PRG2 etc
Preset 3 – (split) lower octave sends Program Change – upper octave (normal) note on/off
Preset 4 – (split) key1 PRG1 – key2 PRG2 – remaining keys normal play

… and a way to access above presets standalone on the xKey
octave+ and pitchbend+ (key1 – Preset1 // key2 Preset2…
or
octave+ and octave- (similar to the Transpose function).

[Zhao Yitian]

Ok, understand. Sorry you only can send preset to Xkey from Xkey Plus, because inn Xkey the memory is not big enough to save all these configurations. 🙁

[keymanpal]

OK! Thanks Zhao, yeah memory limitations… understod!

[Author]

Posts